Blade sharpener review

I bought my rotary blade sharpener from Amazon (here). It arrived promptly but I had to wait a few days before I was able to use it and try out my newly sharpened blade.

Sharpener unpacked and ready to go!

Cutter dismantled and blade exposed 

Blade slotted onto one half of the holder and ready to be screwed into place

Blade in place for sharpening (the sharpening edge/circle is in the background) 

Once inserted in the sharpening circle, place on light side first and turn 12 times,
turn over the blade and do the same again for that side.
Turn over the sharpener and do the same on the dark side.

The sharpener works very well and I was quickly able to sharpen my blade, reinsert it into my handle and cut plenty more bias.

Positives:
– pretty inexpensive when you take into account the cost of new blades
– small and easy to stow
– easy to use (with lots of care)

Negatives:
– cutter has to be dismantled and blade fully exposed to use
– the blade and holder need to be turned over (which needs to be done with a lot of care)
– the holder and blade just sit in the sharpening circle and are not 'locked' in
– there is no safety guard on the sharpener

Conclusion:
With due care this is a really nifty little addition to my toolbox. However it does need to be used with a great degree of care.

A word of warning: a blade sharp enough to cut fabric is more than sharp enough to cut human.

I don't have full pics of the process, I'm afraid, because I got a little casual with the sharpener and cut myself. Cue bleeding and steri-strips for a week. My accident did spotlight the safety aspects quite nicely!

(For both work and crafting I've used cutters and scalpels for many years but was obviously a bit TOO relaxed when using this. It hasn't put me off. Lesson learned.)